Web Analytics Made Easy -
    StatCounter

Oil Hardening Drill Rod Round Brownells

Oil Hardening Drill Rod Round Brownells

Shop for Low Price Oil Hardening Drill Rod Round Brownells .Compare Price and Options of Oil Hardening Drill Rod Round Brownells from variety stores in usa. 2016 Deal.

- This Oil Hardening Drill Rod Round Brownells is incredibly fantastic, with a whole lot of like to arrive see you here advocate. test to go to and locate it priced truthful get a good deal cost-free transport buy. seriously simple thanks a great deal.
- appear to the quite a few that should have to get each high-priced and. But impressed with the invest in and delivery of the process listed here. not really let down this buy to the world wide web. excellent assistance, extremely amazed
- To wander through, in accordance to your office, and general stores identified that costs below less expensive, greater top quality Oil Hardening Drill Rod Round Brownellsstore several simple-to-use solutions and phone me acquire listed here and so on. well then, would you notify a friend. almost all of this amount.
- simple, rapid protect you may examine selling prices and buy other Oil Hardening Drill Rod Round Brownells obtainable speedily. at ease.

Click to get Discount Oil Hardening Drill Rod Round Brownells

Oil Hardening Drill Rod Round Brownells Description

If you find product , Deals.If at the time will discount more Savings So you already decide you want have Oil Hardening Drill Rod Round Brownells for your, but you don't know where to get the best price for this Oil Hardening Drill Rod Round Brownells . We already done the research and spend a lot of time for you. Oil Hardening Drill Rod Round Brownells to find out where to get the best deal on Oil Hardening Drill Rod Round Brownells.

If the Oil Hardening Drill Rod Round Brownells is integrated that you must have, be sure to order now to stay away from disappointment Click on right here to find out exactly where to get the very best deal on Oil Hardening Drill Rod Round Brownells.

Content:

Oil Hardening Drill Rod Round Brownells.

$5.99 - $107.99
O-1 OIL HARDENING DRILL ROD ROUND Carbon - .95% Manganese - 1.20% Silicon - .25% For ¼" ...

Product Description

Indispensable In The Gun Shop For Parts, Tools & Repairs

O-1 OIL HARDENING DRILL ROD ROUND
Carbon - .95%    Manganese - 1.20%    Silicon - .25%

For ¼" round and larger, we carry oil hardening drill rod rather than water hardening. The O-1 in this size range is characterized by good machineability, smooth finish as well as superior dimensional stability and excellent hardening characteristics. We recommend it for use in dies, tools, parts, and punches. Excellent for general use in the shop.

HARDENING: Heat slowly to 1475° F. - 1525° F. If a controlled furnace is not available, use 1500° Tempilaq. Hold at this temperature for a few seconds then quench in a light quenching oil.

TEMPERING: Temper immediately. The following hardness table is for a one hour draw after oil quenching at 1500° F.


Degrees F.
Rockwell C Hardness
As Hardened 63 - 65
300° 63 - 64
400° 61 - 62
500° 58 - 60
600° 54 - 56
700° 51 - 53
800° 46 - 48
900° 43 - 45


Big Book Catalog, Issue:71, Page:381

SPECS: Rods are 18" in length.

Water Hardening Drill Rod Brownells.

$3.99 - $5.99
One of the remarkable features of these tool steels is the low draw temperature to achieve maximum torsion impact strength. Most drawing can ...

Product Description

Indispensable In The Gun Shop For Parts, Tools & Repairs

One of the remarkable features of these tool steels is the low draw temperature to achieve maximum torsion impact strength. Most drawing can be done in a kitchen oven! Or you can easily make a small and efficient draw furnace on your bench using furnace brick, a simple heat element and a kitchen oven heat control. Draw all steel shown one hour.

W-1 WATER HARDENING DRILL ROD
Carbon - 1.00%    Manganese - .40%   Silicon - .20%

A fine-grained, commercial quality steel, W-1 can be used for tools, parts, dies or punches which require great hardness and a tough inner core for maximum strength. The sizes we carry should meet 99% of all requirements for pins in guns.

HARDENING: Heat the part to 1450° - 1500° F., or slightly higher (up to 1600° F.) if unusual depth of hardness is required. If a furnace is not available, use 1450° Tempilaq. Hold at this temperature for a few seconds, then quench in an 8% brine solution. Do not use fresh water! To make a brine solution: Add ¾ lb. (340 g) of rock salt to one gallon of water.

TEMPERING: Temper immediately. A one hour draw at the following temperatures will produce hardness on the Rockwell C scale as follows:


Degrees F.
Rockwell C Hardness
As Hardened 66 - 67
200° 66 - 67
300° 64 - 65
400° 61 - 62
500° 58 - 59
600° 54 - 55
700° 50 - 51
800° 46 - 47


Big Book Catalog, Issue:71, Page:381

SPECS: Rods are 18" in length.

La Salle Fatigue Proof® Steel Rods Brownells.

$69.99 - $143.99
Superior quality, high density; is very machineable and tough without brittleness, due to a higher ratio of manganese to carbon. Does not require ...

Product Description

Makes Parts & Put Them Right To Work; No Heat Treating Required

Superior quality, high density; is very machineable and tough without brittleness, due to a higher ratio of manganese to carbon. Does not require heat treating like low density mild steel - perfect for spring guides, screws, firing pins, any parts that will be subject to extreme shock or repeated stress. Fatigueproof® is a registered trademark of Niagara LaSalle Corporation.


Big Book Catalog, Issue:71, Page:382
SPECS: ¼" (6.3mm), 5/16" (7.9mm), 3/8" (9.5mm) diameter. 18" (45.7cm) long steel rods. 6 rods per pak. Assortment contains 2 of each size. 140,000 psi tensile strength, Rc 30-36. Tolerances are + or – .006" (.15mm).

Brass Rounds Flats & Squares Brownells.

$19.99 - $91.99
Free-cutting, half-hard brass in sizes suited to gun work and hobbies. Round Assortment A contains 1⁄8, ¼, 3⁄8 and ½ diameter pieces. Round ...

Product Description

100's Of Uses

Free-cutting, half-hard brass in sizes suited to gun work and hobbies. Round Assortment “A” contains 1⁄8", ¼", 3⁄8" and ½" diameter pieces. Round Assortment “B” contains all 6 sizes. Flat Assortments contain one each of the sizes listed.


Big Book Catalog, Issue:71, Page:382
SPECS: 18" (45.7cm) long.

Aluminum Rounds Brownells.

$9.99 - $41.99
6061-T6 - Heat-treated, aluminum alloy that offers a wide range of both mechanical properties and corrosion resistance. Easily machined; has a maximum tensile ...

Product Description

Aluminum Alloys For Machining Strong, Lightweight Parts For Gunsmithing

6061-T6 - Heat-treated, aluminum alloy that offers a wide range of both mechanical properties and corrosion resistance. Easily machined; has a maximum tensile strength of 35,000 psi.


Big Book Catalog, Issue:71, Page:381
SPECS:18" (45.7cm) long.

Mild Steel Rounds & Flats Brownells.

$5.99 - $139.99
No more Mystery Metals from the junk yard. This quality 1018 steel is ideal for making shop projects. 18 lengths. Assortments contain one ...

Product Description

1018 Steel In Handy Lengths And Sizes

No more "Mystery Metals" from the junk yard. This quality 1018 steel is ideal for making shop projects. 18" lengths. Assortments contain one piece of each size.


Big Book Catalog, Issue:71, Page:382

0 Comments

LEAVE A COMMENT

Search

categories

popular post