Web Analytics Made Easy -
    StatCounter

Ar-15 M4-72 Severe-Duty Compensator 22 Caliber Precision Armament

Ar-15 M4-72 Severe-Duty Compensator 22 Caliber Precision Armament

Where to purchase Ar-15 M4-72 Severe-Duty Compensator 22 Caliber Precision Armament You can order Ar-15 M4-72 Severe-Duty Compensator 22 Caliber Precision Armament after check, compare the prices and check day for shipping. Some people are are interested to buy Ar-15 M4-72 Severe-Duty Compensator 22 Caliber Precision Armament at the cheap price. While the item could possibly be priced similarly at different shops.

Content:

Ar-15 M4-72 Severe-Duty Compensator 22 Caliber Precision Armament.

$94.99
Compensator features a large initial expansion chamber which dissipates combustion gases at a lower pressure, then directs the gases to the side ...

Product Description

Compensator features a large initial expansion chamber which dissipates combustion gases at a lower pressure, then directs the gases to the side and rear through precisely canted vents. Innovative reverse venting design reduces recoil and blowback while eliminating muzzle rise. Closed bottom in compensator greatly diminishes dust signature. Machined from high strength stainless steel for corrosion resistance, compensator will not erode due to the extreme heat of automatic fire. Requires use of Accu-Washers sold seperately for proper installation.


AR-15, Issue:11, Page:024
Big Book Catalog, Issue:71, Page:025

SPECS: HTSR 416 stainless steel bar stock, matte black or in-the-white stainless steel finish. 1/2-28 TPI thread. 2.25" (5.2cm) OAL. 0.875" (2.2cm) dia. 2.6 oz (73.7g) wt. Fits .223 Cal (5.56mm) caliber.

Ar-15 Xm16e1 3 Prong Flash Hider 22 Cal Brownells.

$15.00
Complete your Retro build with the Brownells Improved 3 Prong Flash Hider. The “Improved” Flash Hider was used following the discontinuation ...

Product Description

Complete your Retro build with the Brownells Early 3 Prong Duckbill flash hider

Complete your Retro build with the Brownells Improved 3 Prong Flash Hider.

The “Improved” Flash Hider was used following the discontinuation of the early “Duckbill” 3 Prong Flash Hider, as the thin prongs tended to bend & break.  This version is proper for Model 602 & 603 rifles, as well as the XM16E1 issued to the US Military and used during Vietnam.  Looks great at home on a Retro rifle, or any AR-15 of your choice.

  • “Improved” 3 Prong design has reinforced prongs
  • Phosphate finish
  • ½-28 threads
  • Modeled directly off of original part

Build the proper XM16E1 or Retro rifle of your choice with an Early 3 Prong Flash Hider.

This muzzle device does not have wrench flats to install. A strap wrench or 3 prong armorers wrench is needed to properly install.


Big Book Catalog, Issue:71, Page:023

Ar .308 Claymore Muzzle Brake 30 Caliber Troy Industries, Inc..

$66.99
Compact brake is designed to direct both blast and noise forward, away from the shooter, to effectively dampen recoil for better control. ...

Product Description

Compact brake is designed to direct both blast and noise forward, away from the shooter, to effectively dampen recoil for better control. Brake gives an extremely low dust signature and features a recessed crown with a raised saw tooth rim that allows secondary use as a breeching device. Humorously inscribed with “Point Toward Enemy” and large arrow. Models available to fit rifles chambered in 7.62/.308/6.8.


AR-15, Issue:11, Page:026
Big Book Catalog, Issue:71, Page:026

SPECS: Hardened 4140 steel, Parkerized, matte black. 2.25" long, .970" O.D. Threads: 7.62/.308/6.8 - 5⁄8" -24 tpi. Crush washer included.

Ak-47 J-Tac47 Compensator 30 Caliber Primary Weapons.

$59.99
FEATURES: Recoil compensator for AK-47 style rifles 14x1 left hand threads Includes polymer ...

Product Description

FEATURES:

  • Recoil compensator for AK-47 style rifles 
  • 14x1 left hand threads
  • Includes polymer washer to mate solidly against the front sight tower
  • Washer is heat resistant up to 900 degrees
  • Length: 1.95"
  • Diameter: .875"
  • Weight: 2.4 oz.
  • Matte black finish
  • For use on weapons with a bullet diameter equal to or less than .30 cal or 7.62mm

BENEFITS:

  • Recoil compensator that not only lessens the recoil of your AK-47, but does so without a significant increase in blast noise directed toward the shooter or individuals next to the shooter
  • Included washer and notched rear end ensure proper indexing of ports
  • Matte black finish matches the standard finish on AK-47 rifles well
  • Instructions are included
  • A high heat polymer washer is included for those needing to add a spacer between the front sight base and the compensator

Ar 308 A2 Flash Hider 30 Cal Dpms.

$20.99
Standard, A2-style “birdcage” flash suppressor. Solid bottom helps reduce dust signature. Steel, black finish, fits barrels with 5/8"-24 tpi threads. Crush washer ...

Product Description

Standard, A2-style “birdcage” flash suppressor. Solid bottom helps reduce dust signature. Steel, black finish, fits barrels with 5/8"-24 tpi threads. Crush washer sold separately.


AR-15, Issue:11, Page:039
Big Book Catalog, Issue:71, Page:042

Rifle Flash Hider Assemblies Taper-Lok Sig Sauer.

$67.00 - $89.00
The Close Quarter Battle (CQB) Flash Hider reduces the flash signature of the shot when the silencer is not installed. Timing the ...

Product Description

The Close Quarter Battle (CQB) Flash Hider reduces the flash signature of the shot when the silencer is not installed. Timing the Flash Hider could not be easier. Once the silencer mount is attached to the barrel, the Flash Hider is added with the provided crush washer. Simply turn the Flash Hider on the crush washer until the ports are timed in the desired orientation. The 5.56 flash hider assembly is available in 1/2-28 threads, and the 7.62 is available in 1/2-28 and 5/8-24 threads.

Srd556-Qd Suppressor 5.56 Mm Nato Quick Detach Sig Sauer.

$679.99
The SRD556-QD is an Inconel 718 silencer using fast-attach muzzle devices to mount the silencer to the rifle. Inconel 718, a Nickel ...

Product Description

The SRD556-QD is an Inconel 718 silencer using fast-attach muzzle devices to mount the silencer to the rifle. Inconel 718, a Nickel Alloy Stainless Steel, provides the highest level of durability, particularly with short-barreled hosts using supersonic ammunition.

The 5.56mm fast-attach muzzle device system is available in 1/2"x 28tpi threads matching the vast majority of modern sporting rifles in .223/5.56mm on the market today. The rear mount has wrench flats to torque the silencer to the barrel. There is a secondary retention latch that is depressed to remove the silencer from the fast-attach mount. The SRD556-QD comes with one 1/2"x 28tpi Taper-Lok™ muzzle brake. 134 dB rated. Made of Inconel 718.

Helix Ifm6 Suppressor 7.62 Direct Thread Operators Suppressor Systems.

$1,299.00
The HELIX 7.62 IFM suppressors are an integrated flush mount system that regulates backpressure and reduces sound and flash signature in a ...

Product Description

The HELIX 7.62 IFM suppressors are an integrated flush mount system that regulates backpressure and reduces sound and flash signature in a single unit while offering greater modularity for use on multiple rifles. Built with titanium, stainless steel, aluminum and cobalt, the HELIX 7.62 IFM suppressors delivers effective strength to weight.  The IFM6 and IFM7 also include a separate mounting device – the STS-Muzzle Brake.

Built with the same technology used in our ELITE line, the IFM6 delivers hearing safe sound and flash suppression and hassle-free use without the toxic blowback, high heat, or constant need to adjust and clean your gun found with baffle suppressors.

And with the purchase of additional STS-Muzzle Brakes in various calibers and thread patterns, the IFM6 can be quickly switched between your guns. Just thread the IFM6 onto the STS-Muzzle Brake, hand tighten and you’re ready to shoot. The self-tightening design of the STS and the IFM6 make them impossible to loosen during fire.

 

0 Comments

LEAVE A COMMENT

Search

categories

popular post