Add to carts Thread Protectors Gemtech You can order Thread Protectors Gemtech after check, compare the and check day for shipping. Some people are want to buy Thread Protectors Gemtech with the cheap price. While the item might be priced similarly at different shops.
The GEMTECH Thread Protector is designed to keep fine threads from being damaged during transport or while operating your firearm without a suppressor attached. Fits securely on most appropriately-threaded pistol or rifle barrels.
The GEMTECH Thread Protector is featured in variety of sizes to fit your specific caliber, application and thread size.
An incredible maze of gas dispersing holes limits muzzle rise with no increase in muzzle blast. Multiple venturi expansion chambers disperse and redirect gases for effective recoil control, while limiting blast effects. Unique design features attenuating holes that are both horizontal and perpendicular to the centerline of the bore to disperse gas and sound equally to all sides. Available in steel with Parkerized finish or stainless steel with matte finish. Same performance in a larger, varmint weight contour.
SPECS: Stressproof chrome molly steel (CM), in the white or 416 stainless steel (SS). Require threading of barrel.
The SRD762-QD is an Inconel 718 silencer using fast-attach muzzle devices to attach the silencer to the rifle. Inconel 718, a Nickel Alloy Stainless Steel, provides the highest level of durability, particularly with short-barreled hosts using supersonic ammunition. The 7.62mm muzzle device is available in 5/8"-24tpi threads matching the vast majority of modern sporting rifles in .308/762 on the market today. The rear mount has wrench flats to torque the silencer to the barrel. There is a secondary retention latch that is depressed to remove the silencer from the mount.
The SRD762-QD is rated up to 300 Win Mag and any other rifle cartridges that are of equal or less projectile diameter, pressure and case capacity. Examples of this would be .204 Ruger, .223/5.56x45mm, 5.45x39mm, 7.62x39mm, 7.62x35 (300 Blackout) 6.5 Grendel, 6.5 Creedmoor, 6.8 Spc, .260 Remington and other cartridges. The SRD762-QD comes with one 5/8"-24tpi Taper-Lok muzzle brake. 140 dB rated. Made of Inconel 718.
308BLMIC- The .308 Compensator features six opposing side ports direct gasses outward reducing muzzle jump and giving the LR-308's a reduced felt recoil similar to that of an AP4 Carbine. Made of 4140 steel with a manganese phosphated finish, this new compensator measures 15/16" diameter and 2 3/8" length. Thread pitch 5/8-24.
SPECS: 308BLMIC- steel, manganese phosphated finish, .975" outside diamter, 2 3/8" length. Thread pitch 5/8-24. Jam nut included.
Low-profile steel compensator redirects and harnesses combustion gas energy to reduce felt recoil by as much as 70% compared to an uncompensated barrel. Helps the shooter stay on target for accurate follow-up shots and fast transition to the next target. Built to the exacting requirements of noted professional weapons instructor and tactical competition shooter Bennie Cooley to combine the recoil reduction of J.P.’s popular Recoil Eliminator muzzle brake in a slim, streamlined compensator that meets the 1" x 3" size requirements of SOF, WC 3-Gun, USPSA Limited, and other tactical rifle competitions. Large, flat interior baffle surfaces allow the bullet to pass through while redirecting the rapidly expanding gas to the sides and slightly forward through the square-cut side vents to create forward thrust that counteracts bullet recoil. The higher the pressure, the more counteracting force the comp actually provides. In addition, four tuned ports on top minimize muzzle rise, further helping the shooter keep the sights on target. Solid bottom prevents kicking up a dust signature when shooting prone. Precision-machined from high-grade carbon steel, with a tough matte black oxide finish, or stainless steel with a brightly polished surface. All models fit rifles chambered in .223/5.56mm; can be bored out for larger calibers. Large Profile is a beefed-up version of Standard model for .875" O.D. bull barrels and has extra baffle surface area for maximum reduction of felt recoil while retaining the cosmetics of the Standard series. Not legal for Limited Tactical Division competition.
SPECS: Carbon steel, matte black oxide finish, or stainless steel, polished finish. All models bored for .223/5.56mm with ½”-28 threads. .281” I.D. exit hole may be enlarged to fit other calibers. Installation instructions included. Large Profile – 2¾” (7cm) long, 1.22” (3.1cm) O.D. Fits .875” O.D. barrels. Not Limited/Tactical Division competition legal.
An incredible maze of gas dispersing holes limits muzzle rise with no increase in muzzle blast. Multiple venturi expansion chambers disperse and redirect gases for effective recoil control, while limiting blast effects. Unique design features attenuating holes that are both horizontal and perpendicular to the centerline of the bore to disperse gas and sound equally to all sides. Available in steel with Parkerized finish or stainless steel with matte finish.
SPECS: Stressproof® steel, manganese phosphate Parkerized finish, matte black, or 416 stainless steel, matte finish.
Longitudinal ports help minimize the blinding effects of muzzle flash in low light for improved target acquisition during night operations. Screw-on design for threaded barrels only. Includes crush washer for proper timing of vents. .223 model has four ports and aggressive, serrated notches at the tip that provide extra insurance in hand-to-hand combat. Integral rings at the base accept military sound suppressors and allow mounting of Blank Firing Attachments (BFAs) for training exercises.
SPECS: Steel, mil-spec phosphate coating. .223 - ½"-28 tpi. 2¼" (5.7cm) long, 7⁄8" (2.2cm) diameter. 2.3 oz. (65 g) wt.
A Blackout Flash Hider for AK-47 rifles! With its three equally-spaced horizontal prongs, the AAC AK-47 Blackout Non-Mount Flash Hider, effectively reduces muzzle flash on your Kalashnikov.
Because of its open-ended design, the AAC AK-47 Blackout Non-Mount Flash Hider won’t wear or erode like closed-end devices.
The AAC AK-47 Blackout Non-Mount Flash Hider has no provision for mounting a suppressor.