Cheapest Ar-15 Phantom 5c2 Flash Suppressor 22 Cal Yankee Hill Machine Co., Inc. You can order Ar-15 Phantom 5c2 Flash Suppressor 22 Cal Yankee Hill Machine Co., Inc. after check, compare the values and check day for shipping. Some people are want to buy Ar-15 Phantom 5c2 Flash Suppressor 22 Cal Yankee Hill Machine Co., Inc. at the cheap price. While the item could be priced similarly at different shops.
Five, straight, longitudinal vents hide flash while dispersing gases up and outward to tame muzzle rise. No downward facing port helps eliminate dust signature when shooting in the prone position. For threaded barrels only, includes crush washer.
SPECS: Steel, mil-spec phosphate coating. .223 - ½"-28 tpi. 2¼" (5.7cm) long, 7⁄8" (2.2cm) diameter. 2.1 oz. (60 g) wt.
The Brownells Short Muzzle Brakes offer an effective braking solution, with minimal added length
Construction, tool steel with a black oxide finish or stainless steel. Length – 1”. Diameter – 0.75". Threads – ½-28. Do not use bullets larger in diameter than .223/5.56 in SMB 5.56
Three equally-spaced horizontal prongs efficiently reduce muzzle flash to help minimize the blinding effect of the flash on the shooter in low-light conditions. Short OAL and flat, smooth muzzle face with rounded edges prevents hang-ups and aids in unencumbered weapon deployment. Precision machined from heat-treated steel and finished with AA's proprietary SCARmor™ coating that gives high surface hardness for added resistance to blast erosion. 51T models have an integral 51-tooth ratchet mount that accepts Advanced Armament sound suppressors. All models are available in sizes to fit rifles chambered in 7.62mm/.308 (5/8"-24 tpi muzzle threads).
SPECS: 17-4 stainless steel, SCARmor finish, matte black. 51T 7.62 - 2½" long. 7⁄8" dia. 3.5 oz. (98g) wt.
The SRD556 is an Inconel 718 direct thread silencer. Inconel 718, a Nickel Alloy Stainless Steel, provides the highest level of durability, particularly with short-barreled hosts using supersonic ammunition. The 1/2”x28tpi threads match the vast majority of modern sporting rifles in .223/5.56mm on the market today. The rear mount has wrench flats to torque the silencer to the barrel. These wrench flats can be used as a location to "pin and weld" the silencer to make a shorter barrel over 16" in total length. 133 dB RATED. Made from Inconel 718.
Single expansion chamber and 42 total ports, 21 on each side, angled 7° forward, provide maximum recoil control. Blast and sound are moved forward, away from the shooter. Non-vented top and bottom surfaces reduce muzzle rise while limiting dust signature. CNC machined for precise fit with very little finish work. Rear of comp can be tapered to conform to barrel. Bore exit hole must be opened up to .020" over bullet diameter.
SPECS: Chrome Moly In-the-white or Stainless Steel, natural finish. 2" (5cm) long 1" O.D. 3 thread sizes: 5/8"-24.
In addition to offering superior compensation characteristics, PWS FSC Series provides enough flash suppression to keep the flash out of your optics and line of sight. Designed for both competitive and tactical use, the FSC Series allows for superior muzzle stabilization and aids the shooter in faster follow-up shots and accuracy.
The unique port design of the FSC Series yields muzzle control that meets or exceeds the performance of the best muzzle brakes on the market without the teeth-rattling overpressure indicative of other brakes and compensators.
Dual, curved restrictor plates with a tremendous amount of surface area stop exiting barrel gases and pull the barrel forward to counteract recoil and muzzle flip. The front sight or scope stays right on target for a faster second shot, plus less felt recoil and shooter fatigue. Models available for rifles chambered in .223/5.56mm and .308/7.62mm.
SPECS: Steel, blued, matte finish. 11⁄2" (3.8cm) dia., 21⁄4" (5.7cm) long. .223 - 5.3 oz. (149g) wt. Fits ½"-28 tpi muzzle threads. .281" exit hole accommodates bores up to .243/6mm without modification; may be enlarged for bores up to .358". .308 - 4.8 oz. (136g) wt. Fits 5⁄8"-24 tpi muzzle threads. .350" exit hole may be enlarged to fit bores up to .416".
The Saker 7.62 is more than just another silencer on the market. With the unique MAAD cap users can adapt the silencer to their needs with optional accessories. The Patent pending Trifecta MAAD mount system works with the Trifecta muzzle brake and Trifecta flash hider, allowing the user single hand operation. The Sakers baffles are constructed from Stellite. Full auto rated.
SPECS: Caliber: 5.56 - 7.62, Weight: 20.7 OZ, Diameter: 1.500”, Length: 7.50”, Sound Levels: .308 -139dB, 5.56 -134.Db, 300BLK Subsonic -126dB, Finish: Black Oxide.