Web Analytics Made Easy -
    StatCounter

Cherry Bomb Muzzle Brakes Q

Cherry Bomb Muzzle Brakes Q

What is the best price for Cherry Bomb Muzzle Brakes Q You can order Cherry Bomb Muzzle Brakes Q after check, compare the values and check day for shipping. Some people are are interested Cherry Bomb Muzzle Brakes Q in the cheap price. While the item could be priced similarly at different shops.

Content:

Cherry Bomb Muzzle Brakes Q.

$75.00
Designed for use with the company's Thunder Chicken and Trash Panda silencers, the Q Cherry Bomb Muzzle Brakes are built with a ...

Product Description

Quick, Quiet, Quality

Designed for use with the company's Thunder Chicken and Trash Panda silencers, the Q Cherry Bomb Muzzle Brakes are built with a taper-mount shoulder that allows these suppressors to quickly mount onto the company's Fix and Honey Badger guns.

The brakes install easily with the use of a 1/2-inch socket and are built with 360-degree ports that eliminate the need for timing. The brakes are compatible with all 90-degree barrel shoulders and are available in 1/2-24 and 5/8-24 thread pitches.

The Q Cherry Bomb Muzzle Brakes measures only 1.64 inches long and weighs just 2 ounces, so it cannot be used to pin and weld to a barrel to meet overall ATF length requirements with standard 14.5-inch barrels.

Ar-15 Enhanced Stabilization Attchmnt 22cal Apex Tactical Specialties Inc.

$56.95
Triple baffle compensator forces combustive gases away from the shooter, helping to reduce recoil and enhance muzzle stability. Top gas vent pushes ...

Product Description

Designed To Help Shooters Score Rapid Hits

Triple baffle compensator forces combustive gases away from the shooter, helping to reduce recoil and enhance muzzle stability. Top gas vent pushes the compensator downward, reducing muzzle climb and allowing you stay on target for fast follow up shots. Compensator fits standard ½-28 muzzle threads on any AR style .223 and 5.56 rifle. Includes crush washer for proper timing and installation.

SPECS: Steel, melonite coat, matte black. 2-9/16" (6.5cm) long, 3/4" (1.9cm) diameter. 2.2 oz (63g) wt. 1/2-28 tpi. Fits AR-15 rifles chambered in .223/5.56mm.

Muzzle Brake Wrath 30 Caliber Blackhawk Industries.

$74.99 - $87.99
Blackhawk's Wrath Muzzle Brake tames the ferocious muzzle blast and heavy recoil of .338 Lapua rifles. It's also necessary hardware for installing ...

Product Description

Suppressor-Ready Brake Increases Muzzle Control

Blackhawk's Wrath Muzzle Brake tames the ferocious muzzle blast and heavy recoil of .338 Lapua rifles. It's also necessary hardware for installing a Blackhawk Wrath Sound Suppressor with QD mounts. On its own, the Wrath Muzzle Brake takes a big bite out of muzzle climb, enabling shooters to keep on target for faster shot-to-shot recovery.

  • Fits .338 caliber rifles (available thread pitches listed at right)
  • Required for mounting a Blackhawk Wrath Suppressor
  • Rugged all-steel construction with a non-reflective matte black finish

Blackhawk's Wrath Muzzle Brake is an excellent enhancement to the shootability of any .338 long-range rifle.

Silencerco Omega Hellfire Suppressor Mount Area 419.

$90.00
For those who have number of SilencerCo suppressors for their guns, having an easy-attachment mechanism means they can run silent in ...

Product Description

Made for the Omega

For those who have  number of SilencerCo suppressors for their guns, having an easy-attachment mechanism means they can run silent in seconds. One of the more unique QD units on the market is the Area 419 Hellfire Suppressor Mount, built specifically to interface with several models of SilencerCo cans.

The Area 419 Hellfire Suppressor Mount is constructed using the company's unique self-timing mechanism that's built from scratch to be easier, simpler and more durable than other mounts on the market. The unique two-piece design ensures that users can time the built-in brake without shims or rough estimations.

  • Black-nitride finish
  • Install wrench included
  • Blue Loctite recommended for install

This particular model of the Area 419 Hellfire Suppressor Mount is built for SilencerCo Omega, Hybrid and Harvester BIG BORE suppressors.

Ruger® Mini-14® 580 Flash Suppressor 22 Cal Choate.

$47.99
Easy to install flash suppressor features vented chambers that control muzzle flash. Closed bottom helps reduce dust signature. Replaces front sight with ...

Product Description

Easy to install flash suppressor features vented chambers that control muzzle flash. Closed bottom helps reduce dust signature. Replaces front sight with M14-style wing and post, slips over muzzle and is held by set screw. Includes roll pins and installation instructions. The set screw on bottom is used to position, then roll pin holes must be drilled for installation of the two included roll pins.


Big Book Catalog, Issue:71, Page:173

SPECS: Carbon steel (CS), blued, matte finish, or stainless steel (SS), natural finish. 3½" (8.9cm) long. 7⁄16" (11mm) diameter. 580 fits Mini-14® with standard factory barrel and serial number prefix of 580 or higher. 

Ak-47 Blast Can Compensator .30 Caliber Midwest Industries, Inc..

$29.95
The firearms market has seen increased popularity for AK-style pistols and even short-barreled rifle variants of popular 16-inch non-NFA carbine designs. An ...

Product Description

Redirect Your AK Muzzle Blast

The firearms market has seen increased popularity for AK-style pistols and even short-barreled rifle variants of popular 16-inch non-NFA carbine designs. An issue with these short-barreled models is the increased muzzle blast, especially with a support hand being near the muzzle. The Midwest Industries AK-47 Blast Can Compensator eliminates this issue.

The Midwest Industries AK-47 Blast Can Compensator works by directing the escaping gases at the muzzle forward, thereby directing them away from appendages on handguards. The design does not reduce flash or recoil, however.

  • Machined from 6061 aluminum
  • Features hard-coat anodized black finish
  • Measures 3.375 inches x 1.2 inches
  • Weight: 3.2 ounces

The Midwest Industries AK-47 Blast Can Compensator is available in models with M14x1 threats for .30-caliber AK models or 26mm threads for M92/M85 Krink guns. All of the company's Blast Can Compensators are made in the USA.

Ar-15 Blackout Flash Hider 90t 30 Cal Advanced Armament.

$107.99
Three equally-spaced horizontal prongs efficiently reduce muzzle flash to help minimize the blinding effect of the flash on the shooter in low-light ...

Product Description

Three equally-spaced horizontal prongs efficiently reduce muzzle flash to help minimize the blinding effect of the flash on the shooter in low-light conditions. Short OAL and flat, smooth muzzle face with rounded edges prevents hang-ups and aids in unencumbered weapon deployment. Precision machined from heat-treated steel and finished with AA's proprietary SCARmor™ coating that gives high surface hardness for added resistance to blast erosion.  90T models have an integral 90-tooth ratchet mount that accepts Advanced Armament SR-5 and SR-7 silencers.  All models are available in sizes to fit rifles chambered in 7.62mm/.308 (5/8"-24 tpi muzzle threads).


AR-15, Issue:11, Page:023
Big Book Catalog, Issue:71, Page:023

SPECS: 17-4 stainless steel, SCARmor finish, matte black.

Muzzle Brake 22 Caliber Vais.

$109.99
Same performance in a larger, varmint weight contour. .875" (22mm) O.D. may be turned to .800" (20mm). Can be used on calibers ...

Product Description

Superior Recoil Control; Muzzle Blast Reduction

Same performance in a larger, varmint weight contour. .875" (22mm) O.D. may be turned to .800" (20mm). Can be used on calibers from .223" up to .358". 1" Varmint Brake works well on large O.D. of 1" barrels; available in stainless steel, .224.


Big Book Catalog, Issue:71, Page:176

SPECS: Stressproof® steel (CM), in the white, 416 stainless steel (SS), heat treated. Require threading of barrel.

0 Comments

LEAVE A COMMENT

Search

categories

popular post