If you find product , Deals.If at the time will discount more Savings So you already decide you want have Nitrous Compensator 30 Caliber Lancer Systems for your, but you don't know where to get the best price for this Nitrous Compensator 30 Caliber Lancer Systems . We already done the research and spend a lot of time for you. Nitrous Compensator 30 Caliber Lancer Systems to find out where to get the best deal on Nitrous Compensator 30 Caliber Lancer Systems.
The .308 Win. can be a difficult round to tame, especially when it comes to lightweight semi-auto rifles typically chambered in the cartridge. Luckily, the Lancer Systems Nitrous .30-caliber Compensator makes it simple for big-bore rifle owners to reduce the amount of felt recoil experienced in their guns.
The Lancer Systems Nitrous .30-caliber Compensator works through the inclusion of a blast chamber paired up with several directional jets. The jets, located at the 12 o-clock-position on the compensator, direct excess gas upward to minimize muzzle climb.
The Lancer Systems Nitrous .30-caliber Compensator also includes several different-size jet nozzles that enable the end user to tune the amount of gas used to reduce recoil.
An incredible maze of gas dispersing holes limits muzzle rise with no increase in muzzle blast. Multiple venturi expansion chambers disperse and redirect gases for effective recoil control, while limiting blast effects. Unique design features attenuating holes that are both horizontal and perpendicular to the centerline of the bore to disperse gas and sound equally to all sides. Available in steel with Parkerized finish or stainless steel with matte finish. Same performance in a larger, varmint weight contour.
SPECS: Stressproof chrome molly steel (CM), in the white or 416 stainless steel (SS). Require threading of barrel.
Same performance in a short, compact brake that looks “right” and saves weight on carbines or lighter rifles. .750" (19mm) O.D. can be turned down to .650" (16mm) to match thinner barrel contours.
SPECS: Stressproof® steel (CM), in the white, 416 stainless steel (SS), heat treated. 1¾" (4.4cm) ;long. ½"-32 tpi. Requires threading of barrel.
SilencerCo’s 1/2"-28 Rifle Thread Spacer corrects the problem of a .22 rimfire barrel with muzzle threads that are too long. .22 caliber rimfire and centerfire sound suppressors have the same thread pitch 1/2"-28, but the threaded portion of the muzzle is longer on centerfire rifles. Manufacturers goof up more often than you’d expect and give rimfire muzzles centerfire-length threads.
If a rimfire muzzle has an over-long threaded area, you run the risk of damaging your suppressor by tightening it too far onto the barrel. At the least, the suppressor might not be positioned correctly for optimum operation. The SilencerCo 1/2"-28 Rifle Thread Spacer is the solution. It covers the excess threads, while properly positioning your rimfire suppressor on the muzzle.
SilencerCo’s 1/2"x28 Rifle Thread Spacer fills the gap that would otherwise be left between the silencer and thread shoulder. Check your rifle today!
These interchangeable, modular thread adapters, are available in a variety of different thread pitches to allow the Harvester Big Bore to be mounted on virtually any barrel. Sold individually.
Looking for ultimate silence from your precision rifle? The Sandman Ti™ is your huckleberry. With its direct thread attachment and titanium tube it’s the perfect fit for your precision rifle, or even for dedicated use under your AR pattern rifle forend.
The Ti has the class leading solid weld Stellite® baffle core and detachable front cap, just like the rest of our Sandman Series. The exterior is finished in Cerakote® for ultimate durability.
Multi-port brake softens felt recoil and reduces muzzle rise. A single expansion chamber and 42 total ports, 21 on each side, angled 7° forward, provide maximum recoil control. Blast and sound are directed forward, away from the shooter. Non-vented top and bottom surfaces reduce muzzle rise while limiting dust signature. Gunsmithing required. Comes with a .220" (nominal) diameter exit hole that must be opened up to .020" larger than bullet diameter. Can be enlarged to allow bullets up to .44 caliber. Rear exterior of comp can be machined to conform to barrel.
SPECS: 4140 steel, chrome moly (CM), in the white or 416 stainless steel (SS), satin finish. 2-5⁄8" (6.6cm) long. Outside diameter; #01 - .560" (14.2mm)