Web Analytics Made Easy -
    StatCounter

Neck Sizing Bushings L.e. Wilson, Inc.

Neck Sizing Bushings L.e. Wilson, Inc.

Nice Reviews Neck Sizing Bushings L.e. Wilson, Inc. You can order Neck Sizing Bushings L.e. Wilson, Inc. after check, compare the and check day for shipping. Some people are are interested to buy Neck Sizing Bushings L.e. Wilson, Inc. with the cheap price. While the item could be priced similarly at different shops.

Content:

Neck Sizing Bushings L.e. Wilson, Inc..

$14.99
Bushings are available in increments of .001" from .185" through .199" and .218" through .343". The easiest way to tell the bushing ...

Product Description

Bushings are available in increments of .001" from .185" through .199" and .218" through .343". The easiest way to tell the bushing size needed is to measure your loaded rounds at the neck. This caliper or micrometer reading indicates bullet diameter plus twice the thickness of the neck. The bushing diameter must measure less than this, we suggest .002" to .003" smaller. Taking into account the spring-back of the case neck after sizing, this would give you .001" to .002" “grip” on the bullet.

View other sizes:


Sinclair, Issue:1B, Page:055
Sinclair, Issue:1B, Page:056

Tungsten Coated Neck Sizing Bushing Rcbs.

$19.99 - $34.99
RCBS Coated Neck Bushings are interchangeable to let the reloader select a bushing that gives precisely the right amount of tension on ...

Product Description

No-Lube-Required Bushings for Use With GMM Sizing Dies

RCBS Coated Neck Bushings are interchangeable to let the reloader select a bushing that gives precisely the right amount of tension on the bullet when using RCBS Gold Medal Match neck sizing dies. These bushings have a Tungsten Disulfide (WS2) anti-friction coating, so they do not require use to traditional case lube.

  • Self-centering for proper alignment with case neck
  • For best results, use of high-end brass with consistent neck thicknesses
  • For use ONLY with RCBS Gold Medal neck sizing dies

RCBS recommends having neck bushings one to two sizes above and below your target diameter (see note below). RCBS Coated Neck Bushings are a small but critical component in loading extremely consistent-shooting ammo with your Gold Medal Match sizing dies.

Brownells Gun Tech™ Tip: There are two ways to select the steel neck bushings you need: (1) Measure the outside neck diameter of your loaded cartridge and subtract .002" to .003". This allows approximately .001" of brass to spring back for correct neck tension. (2) You can also measure the neck wall thickness of your case, multiply by two, add the diameter of your bullet and subtract .002" to .003".


Sinclair, Issue:5B, Page:056

Bushing Bump Neck Sizing Bushings Forster.

$15.99 - $18.99
Forster neck sizing bushing are made to use with the Forster Precision Plus Bushing Bump Dies only, and they are not interchangeable ...

Product Description

Forster neck sizing bushing are made to use with the Forster Precision Plus Bushing Bump Dies only, and they are not interchangeable with other brands of bushings. Forster bushings are made in .001 inch increments in the sizes needed for the dies Forster makes. All Forster bushings are cryogenically treated to make them ultra smooth and long lasting.


Sinclair, Issue:1B, Page:052

Match Grade Bushing Hornady.

$14.99 - $22.99
The Hornady match Grade Dies feature interchangeable neck sizing bushings that are self centering. The bushings allow the user to size the ...

Product Description

The Hornady match Grade Dies feature interchangeable neck sizing bushings that are self centering. The bushings allow the user to size the case neck to the bullet tension you desire. This eliminates the chance of over-sizing your case necks and overworking the brass. Bushings are available in .002 inch increments. The Match Grade Full Length Die will size the case body, bump the shoulder and size the case neck with the selected bushing. The Match Grade Neck Die sizes the neck with the installed bushing and bumps the shoulder only (no body sizing). Both versions feature a self centering decap spindle with an o-ring spindle tensioner, and the elliptical expander ball with headed decap pin - the same pin used in the Custom Grade Dies. These bushing sizer dies have some unique features and are very well made and finished.


Sinclair, Issue:5B, Page:053

Steel Neck Sizing Bushings Rcbs.

$13.99 - $18.99
RCBS Steel Neck Bushings are interchangeable to let the reloader select a bushing that gives precisely the right amount of tension on ...

Product Description

Can't Load With RCBS GMM Dies Without One

RCBS Steel Neck Bushings are interchangeable to let the reloader select a bushing that gives precisely the right amount of tension on the bullet when using RCBS Gold Medal Match sizing dies. Using a precisely fitted Steel Neck Bushing reduces work hardening of the case neck brass, prolonging case life and helping to improve accuracy.

  • Self-centering for proper alignment with case neck
  • For best results, the use of high-end brass with consistent neck thicknesses is recommended
  • Bushings come "in-the-white" - bare steel - so traditional case lubrication is required
  • For use ONLY with RCBS Gold Medal sizing dies

RCBS recommends having neck bushings one to two sizes above and below your target diameter (see note below). RCBS Steel Neck Bushings are a small but critical component in loading extremely consistent-shooting ammo with your Gold Medal Match sizing dies.

Brownells Gun Tech™ Tip: There are two ways to select the steel neck bushings you need: (1) Measure the outside neck diameter of your loaded cartridge and subtract .002" to .003". This allows approximately .001" of brass to spring back for correct neck tension. (2) You can also measure the neck wall thickness of your case, multiply by two, add the diameter of your bullet and subtract .002" to .003".
 


Sinclair, Issue:5B, Page:056

Carbide Neck Sizing Bushings Sinclair International.

$45.99
Sinclair Carbide Neck Sizing Bushings are very popular among benchrest shooters because they are smoother, harder, and available in ½ thousandths increments. ...

Product Description

Sinclair Carbide Neck Sizing Bushings are very popular among benchrest shooters because they are smoother, harder, and available in ½ thousandths increments. These bushings have a small radius on the down side only, and should not be used upside down. These carbide bushings will fit L.E. Wilson and Redding dies. Currently only available in popular 6mm sizings.


Sinclair, Issue:5B, Page:050

0 Comments

LEAVE A COMMENT

Search

categories

popular post