The modular Osprey Micro is rimfire, full auto rated suppressor that shares design similarities with the popular full size Osprey line. It has a flat sight plane for easy target acquisition and can be reduced from 4.6″ to 3.1″ in length easily with provided tools. Durable enough to be used with a variety of rimfire calibers and ammunition, the Osprey Micro remains easy to clean after hundreds of rounds fired.
The SRD338Ti-QD is a Grade 5 Titanium silencer using fast-attach muzzle devices to attach the silencer to the rifle. The rear mount has wrench flats to torque the silencer to the barrel. There is a secondary retention latch that is depressed to remove the silencer from the mount.
The SRD338Ti-QD is rated up to the 338 Lapua Mag and any other rifle cartridges that are of equal or less projectile diameter, pressure and case capacity. Examples of this would be .204 Ruger, .223/5.56x45mm, 5.45x39mm, 300 Win Mag, 7.62x39mm, 7.62x35 (300 Blackout), 6.5 Grendel, 6.5 Creedmoor, 6.8 Spc, .260 Remington and other cartridges. The SRD338Ti-QD comes with one M18x1.5mm Taper-Lok muzzle brake. Other muzzle devices are available. 138 dB rated. Made of Grade 5 Titanium.
The Saker 5.56 is more than just another silencer on the market. With the unique MAAD cap users can adapt the silencer to their needs with optional accessories. The Patent pending Trifecta MAAD mount system works with the Trifecta muzzle brake and Trifecta flash hider, allowing the user single hand operation. The Sakers baffles are constructed from Stellite. Full auto rated.
Three equally-spaced horizontal prongs efficiently reduce muzzle flash to help minimize the blinding effect of the flash on the shooter in low-light conditions. Short OAL and flat, smooth muzzle face with rounded edges prevents hang-ups and aids in unencumbered weapon deployment. Precision machined from heat-treated steel and finished with AA's proprietary SCARmor™ coating that gives high surface hardness for added resistance to blast erosion. 51T models have an integral 51-tooth ratchet mount that accepts Advanced Armament sound suppressors.
SPECS: 17-4 stainless steel, SCARmor finish, matte black. 51T 5.56 - 2½” (6.4cm) long. 7⁄8" dia. 4.4 oz.
Single expansion chamber with multiple ports that interrupt and align exiting muzzle gases to increase accuracy and cut down on painful recoil. Elliptical, rear, exhaust holes force hot, expanding, muzzle gases forward, away from the shooter’s face and ears for no increase in total noise to the shooter. All models feature a .250" diameter exit hole and tapered design (except the 4S); you can stock fewer recoil reducers and save inventory dollars. Simply open up the exit hole to .040" over bullet size and face back the taper at the rear of the comp to match the barrel diameter during installation.
SPECS: Machined steel, blued or stainless (SS), satin finish. 3" (7.6cm) long. 1S/1SS.872" (22.1mm); .250" diameter exit hole must be reamed or bored .040" over bullet dia. Includes instructions. Installation requires threading of barrel.
Aligns exiting barrel gas so it surrounds and stabilizes the bullet for increased accuracy. Turned from lightweight aluminum so it won't change the balance or feel of your rifle. Clamps to .920" diameter bull barrels.
SPECS: Aluminum, black teflon finish. 2-¾" (7cm) long, 1.2" (3cm) diameter.
The ASR MAAD Mount for the Saker suppressor is compatible with all ASR muzzle devices to avoid having to change out your muzzle devices. Once shouldered, the locking ring ensures the suppressor will not rotate or work itself loose under a heavy firing schedule.