Web Analytics Made Easy -
    StatCounter

Ruger® Mini-14® Long Flash Hider 30 Cal John Masen

Ruger® Mini-14® Long Flash Hider 30 Cal John Masen

"Today, if you do not want to disappoint, Check price before the Price Up.Ruger® Mini-14® Long Flash Hider 30 Cal John Masen You will not regret if check price."  price comparisons for Ruger® Mini-14® Long Flash Hider 30 Cal John Masen

Content:

Ruger® Mini-14® Long Flash Hider 30 Cal John Masen.

$0.00
Traps unburned particles of powder until full combustion is completed. Short - M16A1-style, extends 1¾". Long - Soviet, AKM-style, extra length, maximum ...

Product Description

Traps unburned particles of powder until full combustion is completed. Short - M16A1-style, extends 1¾". Long - Soviet, AKM-style, extra length, maximum “burn”.

Attaches to the end of the barrel via the longer Front Sight Pin (provided)


Big Book Catalog, Issue:70, Page:168

SPECS: Steel, stainless steel (SS), matte finish. Long (LG) - 3-3⁄8" (8.5cm) long, .860" dia. Models for Mini-14®. Mini-14® models will not fit recent production rifles with winged front sight.

Tuneable Muzzle Brake 30 Caliber Superior Shooting.

$0.00
The same muzzle brake that David Tubb uses on his Tubb 2000 rifle drastically reduces recoil and increases accuracy on your heavy-barrel rifle. ...

Product Description

Tune Your Rifle In & Dampen Barrel Vibration

The same muzzle brake that David Tubb uses on his Tubb 2000 rifle drastically reduces recoil and increases accuracy on your heavy-barrel rifle. Tune in your rifle’s accuracy by “dialing in” the muzzle brake forwards or backwards to find exactly the right spot to dampen muzzle vibration and control harmonic vibration. Once you’ve found the perfect spot, snug it down securely with the threaded locking nut. Five-port design catches excess gas to provide an effective brake and counteracts the torque of bullet travel through the barrel.


Big Book Catalog, Issue:69, Page:172
SPECS: Carbon steel, black oxide finish. Brake OD 1-1⁄16" (2.8cm), 2-5⁄16" (5.9cm) long. Nut OD 1" (2.5cm), ¾" (1.9cm) long. Threads are ¾" (1.9cm) x 28 tpi. Bore hole is .26" (6mm).

Ar-15 Quickmount Mk18 Flash Hider 22 Cal Gemtech.

$0.00
The Gemtech Quickmount suppressor adapters attach to classic Gemtech suppressors, including the G5, M496D, HVT, Quicksand and TPR-S. These flash hiders ...

Product Description

The Gemtech Quickmount suppressor adapters attach to classic Gemtech suppressors, including the G5, M496D, HVT, Quicksand and TPR-S.  These flash hiders are precision machined and heat treated, for long service life with the suppressor of your choice. Adapters are available with a traditional flash hider design, with a Phantom style, or with a Smith Enterprise Vortex flash hider.  5.56 models function with the G5 and M496D.  The MK18 adapter allows for suppressor use on short, 10.3” barrels, where there is normally not enough room behind the muzzle device for attachment.

Note: 5.56 suppressors will not fit on 7.62 adapters.  Do not use crush washers with Quickmount adapters.

SPECS: Fits - 1/2-28 threads.

Ar-15 Quickmount Phantom Flash Hider 22 Cal Gemtech.

$0.00
The Gemtech Quickmount suppressor adapters attach to classic Gemtech suppressors, including the G5, M496D, HVT, Quicksand and TPR-S. These flash hiders ...

Product Description

The Gemtech Quickmount suppressor adapters attach to classic Gemtech suppressors, including the G5, M496D, HVT, Quicksand and TPR-S.  These flash hiders are precision machined and heat treated, for long service life with the suppressor of your choice. Adapters are available with a traditional flash hider design, with a Phantom style, or with a Smith Enterprise Vortex flash hider.  5.56 models function with the G5 and M496D.  The MK18 adapter allows for suppressor use on short, 10.3” barrels, where there is normally not enough room behind the muzzle device for attachment.

Note: 5.56 suppressors will not fit on 7.62 adapters.  Do not use crush washers with Quickmount adapters.

SPECS: Fits - 1/2-28 threads.

Ar-15 Single Chamber Brake 22 Caliber Alg Defense.

$0.00
Machined from 4140 steel, this single expansion chamber muzzle break is designed for 5.56mm AR-15 barrels with 1/2" x 28 muzzle threads. ...

Product Description

Decreases Recoil While Increasing Accuracy

Machined from 4140 steel, this single expansion chamber muzzle break is designed for 5.56mm AR-15 barrels with 1/2" x 28 muzzle threads. Unique design allows gas to be expelled upward and to the sides, reducing dust signature and muzzle rise. The black nitride finish resists wear and corrosion. Includes peel washer so muzzle brake can be properly aligned with the barrel.

SPECS: 4140 Steel, black nitride finish. 1/2" x 28 threads. 1-5/8" (4.2cm) OAL. 15/16" (2.4cm) O.D.

5.56 Sts Muzzle Brake Suppressor Mount Operators Suppressor Systems.

$0.00
The 5.56 STS-Muzzle Brake can be mounted onto any barrel with 1/2" X 28" threading. The muzzle device allows for any ...

Product Description

The 5.56 STS-Muzzle Brake can be mounted onto any barrel with 1/2" X 28" threading.  The muzzle device allows for any 5.56 IFM suppressor to be quickly mounted utilising the self-tightening system (STS). Just thread the IFM Suppressor onto the STS-Muzzle Brake, hand tighten and you’re ready to shoot.  The STS-Muzzle Brake is 2.9" long, and can be pinned and welded to a 14.5" barrel to avoid creating an SBR.

Wolf-9sd Suppressor 9mm Direct Thread Dead Air Armament.

$799.00
Dead Air Silencers has released a new 9mm Subgun Suppressor that combines old school styling and new technology--introducing the Wolf-9SD. The ...

Product Description

New Technology Combined with Old School Styling

Dead Air Silencers has released a new 9mm Subgun Suppressor that combines old school styling and new technology--introducing the Wolf-9SD.

The Wolf-9SD features a solid welded core, is built to withstand the abuse of full auto fire and will keep going for years of service.

  • Ratings: 9mm, 300 BLK (Super)
  • Length (Full/Compact): 4.1”/ 7.58”
  • Weight: 7.5 oz/ 14.7 oz
  • Diameter: 1.618”
  • Finish: Cerakote Body
  • Pistons: ½-28, M13.5x1LH, 9/16x24, M14.5x1LH, .578x28, 16x1LH, M16x1RH
  • Fixed Mounts: 3-Lug, ½-28, ½-36, 5/8-24, M18x1, M13.5x1LH

The Dead Air Silencers Wolf-9SD features a removable front module for full length and compact configuration, and is compatible with Ghost and Pyro Pistol Comp accessories.

Weight and length will vary with various attachments (piston/spring, fixed mounts, 3-lug)

Helix Ifm7 Suppressor 7.62 Direct Thread Operators Suppressor Systems.

$1,349.00
The HELIX 7.62 IFM7 suppressor is an integrated flush mount system that regulates backpressure and reduces sound and flash signature in a ...

Product Description

The HELIX 7.62 IFM7 suppressor is an integrated flush mount system that regulates backpressure and reduces sound and flash signature in a single unit while offering greater modularity for use on multiple rifles. Built with titanium, stainless steel, aluminum and cobalt, the HELIX 7.62 IFM7 suppressor delivers effective strength to weight.  The IFM7 also include a separate mounting device – the STS-Muzzle Brake.

And with the purchase of additional STS-Muzzle Brakes in various calibers and thread patterns,, the IFM7 can be quickly switched between your guns. Just thread the IFM7 onto the STS-Muzzle Brake, hand tighten and you’re ready to shoot. The self-tightening design of the STS and the IFM7 make them impossible to loosen during fire.

0 Comments

LEAVE A COMMENT

Search

categories

popular post