The Airborne Arms AAZ9 Warthog Linear Compensator provides powerful reduction in muzzle rise on 9mm firearms with ½-36 muzzle threads. The AAZ9’s biggest benefit comes during periods of sustained rapid fire; you spend less time fighting to keep the muzzle down, so you have more time to land hits on the target.
Starting as 7075 T6 aluminum barstock, the AAZ9 Warthog comp is turned on a lathe, then CNC machined to precise final dimensions before getting its tough, wear- and corrosion-resistant black hardcoat anodized finish.
The result: Airborne’s AAZ9 weighs in at a light 1.8 oz, with a svelt 1.2: outside diameter that allows it to fit under a variety of handguards you might choose for your 9mm AR-15.
Upgrade your 9mm-chambered firearm with the Airborne Arms AAZ9 Warthog Liner Compensator and enjoy the good form of gun control: your total control of the muzzle even when you need to send a lot of lead downrange quickly.
Machined thread protector is designed to prevent damage to barrel threads and crown when a muzzle brake, flash suppressor or other muzzle device is not installed. Available in popular thread sizes and diameters to match Ruger® rifle barrels.
Thread adapter for the Sig Sauer Mosquito.
Threaded gas lock allows fast interchangeability of the included Vortex flash hider and Compensator so weapon meets changing mission requirements. Vortex flash hider features four, specially angled flutes to reduce muzzle flash and preserve night vision, even during full-auto fire. Dissipates gas and retains unburned powder for increased residual burn. Compensator controls muzzle flip and felt recoil for improved accuracy and fast follow-up shots. Special internal blast chamber with side-facing ports deliver superior gas dispersion to help stabilize the muzzle during periods of sustained fire. Flash hider and compensator are precision machined from 8620 bar stock, then heat-treated to provide a high-strength core and tough outer shell. Gas lock is made from 1144 Stressproof® steel to survive heavy recoil. Height of the gas lock dovetail deck allows the use of standard issue USGI front sights or the Smith Enterprise Match or Close Combat Tritium front sights. Kit installation requires no permanent alterations to rifle.
SPECS: Parkerized, black, matte finish. Gas Lock - 1144 Stressproof® steel. 15⁄16" (3.3cm) long, 13⁄16" (2.1cm) wide, 1-13⁄16" (4.6cm) high. 5.6 oz (158 g) wt. 5⁄8"-24 tpi O.D. threads. Vortex & Compensator - 8620 steel. 3¾” (9.5cm) long x .900” (23mm) dia. 5.6 oz (158 g) wt. 5/8"-24 tpi I.D. threads. Fits M14 and M1A. Gas lock wrench recommended for installation.
Now that the Area 419 Sidewinder Suppressor Mount is on the market, owners of SilencerCo suppressors and the Area 419 self-timing muzzle brake system can swap back and forth between recoil-reduction and noise-reduction, depending on their needs.
Thanks to the unique self-timing system used in the Area 419 Sidewinder Suppressor Mount, users can easily and simply swap between the brake and compatible suppressors without headaches. The adapters are designed to be compact, so the overall length of the entire system is only slightly longer than the suppressor itself.
These particular models of the Area 419 Sidewinder Suppressor Mount fit all SilencerCo Omega, Hybrid and Harvester BIG Bore cans, replacing the end cap on each.
Single expansion chamber with multiple ports that interrupt and align exiting muzzle gases to increase accuracy and cut down on painful recoil. Elliptical, rear, exhaust holes force hot, expanding, muzzle gases forward, away from the shooter’s face and ears for no increase in total noise to the shooter. All models feature a .250" diameter exit hole and tapered design (except the 4S); you can stock fewer recoil reducers and save inventory dollars. Simply open up the exit hole to .040" over bullet size and face back the taper at the rear of the comp to match the barrel diameter during installation. Slim-Line (SL) models are smaller in diameter to blend perfectly on thin, ultra-light, mountain rifle barrels. Slim line are made from stainless steel.
SPECS: Machined steel, blued or stainless (SS), satin finish. 3" (7.6cm) long. Diameters: ACS/ACSS .750" (19mm); 1S/1SS, 2S/2SS .872" (22.1mm);
The AAZ5 Warthog Linear Compensator is Airborne Arms’ newest offering for your AR’s muzzle device. The Warthog uses a unique approach to an age old design. Machined from bar stock, 7075-T6 aerospace Aluminum alloy, the Warthog Linear Compensator sheds up to 70% of its weigh (over its Ordnance grade steel counterparts). The aluminum is then made stronger, using a proprietary, hard coat anodizing process.
The Airborne Arms AAZ5 Warthog features a standardized, 1/2×28 T.P.I. thread pitch and will fit most standard 22/223/5.56 (or rifle with like thread pitch).
Low-profile steel compensator redirects and harnesses combustion gas energy to reduce felt recoil by as much as 70% compared to an uncompensated barrel. Helps the shooter stay on target for accurate follow-up shots and fast transition to the next target. Built to the exacting requirements of noted professional weapons instructor and tactical competition shooter Bennie Cooley to combine the recoil reduction of J.P.’s popular Recoil Eliminator muzzle brake in a slim, streamlined compensator that meets the 1" x 3" size requirements of SOF, WC 3-Gun, USPSA Limited, and other tactical rifle competitions. Large, flat interior baffle surfaces allow the bullet to pass through while redirecting the rapidly expanding gas to the sides and slightly forward through the square-cut side vents to create forward thrust that counteracts bullet recoil. The higher the pressure, the more counteracting force the comp actually provides. In addition, four tuned ports on top minimize muzzle rise, further helping the shooter keep the sights on target. Solid bottom prevents kicking up a dust signature when shooting prone. Precision-machined from high-grade carbon steel, with a tough matte black oxide finish, or stainless steel with a brightly polished surface. All models fit rifles chambered in .223/5.56mm; can be bored out for larger calibers. Standard Profile available for barrels with .750" or .875" O.D. at muzzle.
SPECS: Carbon steel, matte black oxide finish, or stainless steel, polished finish. All models bored for .223/5.56mm with ½”-28 threads. .281” I.D. exit hole may be enlarged to fit other calibers. Installation instructions included. Standard Profile – 2-5⁄16" (5.9cm) long, .989” (2.5cm) O.D. Models to fit .750” (1.9cm) and .875” (2.2cm) O.D. barrels. SOF, WC 3-Gun, and USPSA Limited competition legal.