"Today, if you do not want to disappoint, Check price before the Price Up.Ar-15 M11-Spr Muzzle Brake 22 Caliber Precision Armament You will not regret if check price." best reviews of Ar-15 M11-Spr Muzzle Brake 22 Caliber Precision Armament
Designed for tactical applications that require minimal dust signature. A massive symmetrical blast baffle, combined with two compensated front baffles, redirect gas to the sides and upward delivering unparalleled recoil reduction while also minimizing muzzle rise and ground disturbance. High tolerance class-3 threads machined in same operation as bore aperture ensures perfect concentricity; this combined with a progressively decreasing baffle thickness minimizes bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy. Computer FEA optimized for maximum strength to weight ratio and impact survivability. Precision CNC machined from high strength HTSR 400-series stainless steel bar for superior heat and corrosion resistance. Available in either an ultra wear resistant DLC (Diamond-Like Carbon) matte black finish, or stainless steel in-the-white, satin finish. Wrench flats on top and bottom for easy installation and removal. Accu-Washer Muzzle Alignment System advised for installation.
SPECS: HTSR 416 stainless steel, HRC 28-32, DLC finish - matte black, or stainless in the white - satin finish.5.56 version is 1.125" wide, .990" high, 2.225" long (.750" dia. at barrel), 3.3 oz. weight. Fits .223/5.56mm caliber rifles with 1/2-28 threads.
Same performance in a short, compact brake that looks “right” and saves weight on carbines or lighter rifles. .750" (19mm) O.D. can be turned down to .650" (16mm) to match thinner barrel contours.
SPECS: Stressproof® steel (CM), in the white, 416 stainless steel (SS), heat treated. 1¾" (4.4cm) ;long. ½"-32 tpi. Requires threading of barrel.
The GEMTECH DAGGER is an all Titanium suppressor designed for semi-auto 18" 300WM precision rifles, but can also be used on all lesser calibers.
Due to the DAGGER’s extreme strength this suppressor lends itself to use on 12" .308 SBRs and is full auto rated.
Made to SOCOM standards, the GEMTECH DAGGER offers precision machining and quality performance. Finished in black Cerakote with GEMTECH logo endcap.
Unique design redirects concussion forward to provide better flash suppression than standard A2 suppressor on short-barreled AR-15/M16/M4 rifles and other centerfire gas-operated weapons. Virtually eliminates side blast to protect nearby personnel during CQB, building entries, and when shooting from inside vehicles. Lessens felt recoil and reduces muzzle rise to help keep sights on the target for fast follow up shots and superior recoil management on full-auto assault rifles, especially with barrels 13" or shorter. High-carbon steel with matte black manganese phosphate finish stands up to the heat and pressure of thousands of rounds. Convenient, ¾" wrench flats allow easy installation with the same wrench used to remove factory flash suppressor. Crush washer included. Each unit individually serial numbered for quality control.
SPECS: Heat-treated steel, phosphate finish, matte black. 3 1/4" O.A.L. 1 3/8" diameter. 6.7 oz weught. 5.56 model fits rifles in 5.56mm/.223 with 1/2"-28 tpi muzzle threads.
The interchangeable Hybrid Front Cap allows the user to select the correct front cap for the caliber they are using. Available in 9mm, .45, 5.56, & 7.62.
The Micro-Brake stabilizes the muzzle shot-to-shot when the silencer is not installed, reducing muzzle flip and felt recoil. It also provides a barrier between the muzzle blast and the blast baffle of the silencer. Timing the Micro-Brake could not be easier. Once the silencer mount is attached to the barrel, the Micro-Brake is added with the provided crush washer. Simply turn the brake on the crush washer until the ports are timed in the desired orientation. The SRD338Ti-QD to be used with the .338 muzzle brake assembly with appropriate threads, the SRD556-QD to be used with 5.56 muzzle brake assembly, and the SRD762-QD to be used with the 7.62 muzzle brake assemblies.
Combines superior muzzle control with effective flash suppression even on barrels as short as 10 inches. Patent Pending EFAB™ technology uses an array of diverging expansion nozzles to diffuse and cool combustion gases resulting in maximum recoil reduction with minimum concussion to the rear and sides of the shooter. Closed bottom section for less dust signature when shooting prone. Precision machined from heat treated stainless steel with an advanced Ionbond® high temperature CrCN coating for extreme durability. Fits .223/5.56mm rifles with 1/2-28 muzzle threads. Features pilot hole for permanent pinning to bring 14.5" barrels to legal length. Accu-Washer™ Muzzle Alignment System required for installation.
SPECS: Heat-treated stainless Steel. Ionbond® CrCN finish - matte black. .900" diameter, 2.475" long, 3.5 oz.(99g) weight. Fits .223/5.56mm, 1/2-28 threads.
Thread-on muzzle devices give the tactical rifle shooter a variety of options for recoil reduction. Precision CNC machined to exact tolerances from high-quality stainless steel alloy that withstands extreme heat and gas particle erosion, even after thousands of rounds. Stands up to the intense tempo of combat conditions without loss of performance.
Substantially reduces muzzle rise and provides outstanding felt recoil reduction for better shot follow-through, improved accuracy, and faster follow-up shots. Advanced Impulse Diffusion™ technology diffuses muzzle blast to the sides, virtually eliminating gas dispersion back to the shooter and minimizing felt concussion to help keep the sights firmly on the target.
When used in conjunction with a SOCOM Series suppressor, the patent-pending design of the muzzle brake provides multiple bearing surfaces to ensure superior suppressor alignment. A rear labyrinth seal minimizes potential carbon buildup in the indexing system and facilitates suppressor removal after extended firing.
All SureFire SOCOM Series muzzle brakes have blind pilot holes at the 3 and 9 o’clock position to enable fine-tuning of recoil characteristics for individual shooting styles or ammunition characteristics. They also have blind pilot holes at the 6 o’clock position to enable indexing the adapter at bottom dead center, and to pin-and-weld on short-barreled rifles. All that is required is a basic hand drill and appropriate drill bits.
SureFire muzzle brakes are individually inspected for concentricity and alignment, and each is covered by SureFire’s No-Hassle Guarantee. Features:
SPECS: Heat-treated stainless steel, matte black finish. Fits rifles with threaded muzzles only. Crush washer set, tube of Rocksett heat-resistant thread locker, and complete instructions included. Stainless steel construction, matte black Ionbond DLC coating. Available in 5/8-24.