The Turbo Sonic 6000 has the extra capacity you need for large batches of brass or gun parts that need to be cleaned in a hurry. The 6000 features a roomy, heated, 1.6 gallon capacity stainless steel tank that can hold up to 1,300 9mm cases or four large pistol frames. Two powerful transducers clean grungy parts in as little as 10 minutes. Cycle times and heating are digitally controlled, so you can program the machine and let it run while you do other things. Includes a large, pull-out parts basket, plus a convenient drain spout with hose to allow the tank to be emptied quickly and easily with no mess. Tank dimensions: 12.7" long, 8" wide, and 3.9" deep. (Turbo Sonic cleaning solutions sold separately.)
Replacement Rod and Retainer for Sinclair Decapping Die, 749-011-516. Uses Hornady headed decapping pins (Not Included).
Contains no ammonia. Simply add 2-4 capfulls to your media before you tumble to make your brass shine.
Redding decapping dies allow you to deprime and clean your cases prior to sizing. Their small decapping die will handle cases from .22 thru .50 caliber with case lengths up to 2.5 inches. An optional decapping rod is available for .17 thru .20 caliber cases. This optional rod will also accommodate the small .060 inch flash holes found on the PPC and BR cases. For longer cases lengths up to 3.0 inch, select cases smaller than 7mm in neck size. Dies sold separately or as a complete kit. RD69100 Small Decapping Die RD69200 Large Decapping Die RD69250 Optional .17/.20 Caliber Rod RD69500 Complete Decapping Die Kit (includes both dies and optional rod)
Decapping dies are used to remove spent primers from fired cases prior to cleaning. We carry a selection of decapping dies from Sinclair, Redding, RCBS and Lee. All these dies will decap standard cases from 22 to 45 caliber. Redding offers a separate die for cases longer than 2.5 inch and an optional decap rod for their small decap die for PPC, BR, 17, and 20 caliber cases. The Lee and RCBS dies are for standard cases only. The new Sinclair Stainless Decap Die includes pins for standard and PPC/BR flash holes, and an optional rod is available for 17 and 20 caliber cases.
With an innovative top mounted powerhead that dries cases and gun parts quickly and easily, the Hornady® Case & Parts Dryer features multiple levels for increased capacity. With three trays and a spacer for taller parts, the Case & Parts Dryer is quickly disassembled for easy clean up.
20 lbs of 14/20 grit corn cob in a reusable 5 gallon bucket.
Empty your tumbler into the basket, give it a turn and within seconds your brass is sorted from your media. The outer clam-shell lid shuts and locks to keep the media and dust inside. MADE IN THE USA.