"Today, if you do not want to disappoint, Check price before the Price Up.Quick Discharge Brake 22 Caliber Hollands Gunsmithing You will not regret if check price." Quick Discharge Brake 22 Caliber Hollands Gunsmithing for sale online
Three expansion chambers provide up to 45% measured reduction in felt recoil. Triple baffle, exhaust slots redirect noise and muzzle blast away from the shooter. Gives high volume shooters a quiet sounding brake that's easy to clean. Closed bottom keeps exiting gas from blowing up dirt and debris. Tapered shank for easier fitting to different barrel diameters. Adds 1-1/4" to barrel length. Comes with a thread protector.
NOTE: Calibers above 223 the muzzle brake must be drilled out.
SPECS: 4340 chrome moly steel. Blue (BL) or 17-4 stainless steel (SS), matte finish. 2" (5cm) long, .850" (22mm) dia. BL ¾"-28; 975" (24.7mm) dia, SS ¾"-28; 9.80 (24.8mm) dia. Hardened to Rc 42. .250 dia. exit hole, must be drilled out for calibers above .223. Requires threading and indexing of barrel. Instructions included.
The Dead Air Key-Mo adapter makes it easy for you to mount a SilencerCo suppressor on rifle with a Dead Air Armament muzzle brake or flash hider. Simply unscrew your your SilencerCo ASR QD mount and replace it with the Dead Air Key-Mo.
With the Dead Air Key-Mo adapter, you can even run your ASR-equipped suppressor under the hand rail.
Multi-port brake softens felt recoil and reduces muzzle rise. A single expansion chamber and 42 total ports, 21 on each side, angled 7° forward, provide maximum recoil control. Blast and sound are directed forward, away from the shooter. Non-vented top and bottom surfaces reduce muzzle rise while limiting dust signature. Gunsmithing required. Comes with a .220" (nominal) diameter exit hole that must be opened up to .020" larger than bullet diameter. Can be enlarged to allow bullets up to .44 caliber. Rear exterior of comp can be machined to conform to barrel.
SPECS: 4140 steel, chrome moly (CM), in the white or 416 stainless steel (SS), satin finish. 2-5⁄8" (6.6cm) long. Outside diameter; #4 - 1" (2.5cm), .865" (22mm).
Single expansion chamber and 42 total ports, 21 on each side, angled 7° forward, provide maximum recoil control. Blast and sound are moved forward, away from the shooter. Non-vented top and bottom surfaces reduce muzzle rise while limiting dust signature. CNC machined for precise fit with very little finish work. Rear of comp can be tapered to conform to barrel. Bore exit hole must be opened up to .020" over bullet diameter.
SPECS: Chrome Moly In-the-white or Stainless Steel, natural finish. 2" (5cm) long 1" O.D. 3 thread sizes: ½"-28, 9/16"-24
Three large axisymmetric baffles, each featuring five helical ports, redirect a massive volume of gas away from the bore axis in a counter-clockwise radial direction. This not only provides maximum recoil reduction but also reduces the torsional recoil force associated with heavy bullets and fast twist rates. High tolerance class-3 threads machined in same operation as bore aperture ensures perfect concentricity; this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy. Computer FEA optimized for maximum strength to weight ratio and impact survivability. Precision CNC machined from high strength HTSR 400-series stainless steel bar for superior heat and corrosion resistance. Can be modified by a qualified gunsmith to fit larger thread diameters (up to 3/4" or 18mm). Available in either an ultra wear resistant DLC (Diamond-Like Carbon) matte black finish, or stainless steel in-the-white, satin finish. M41 Spanner Wrench advised for installation and removal.
SPECS: HTSR 416 stainless steel, HRC 28-32, DLC finish - matte black, or stainless in the white - satin finish. 1.312" diameter, 2.75" long (.925" dia. at barrel), 5.3 oz. weight. Fits up to .308/7.62mm or 338 caliber rifles with 5/8-24 threads.
Complete your Retro build with the Brownells Early 3 Prong “Duckbill” flash hider.
The “Duckbill” flash hider was found on some of the earliest AR-15 rifles such as the Colt Model 601 used by the US Air Force. These were eventually phased out due to the lightweight prongs bending. Looks great at home on a Retro rifle, or any AR-15 of your choice.
Build the proper 601 or Retro rifle of your choice with an Early 3 Prong Flash Hider.
This muzzle device does not have wrench flats to install. A strap wrench or 3 prong armorers wrench is needed to properly install.
The LANTAC Dragon Muzzle Brake has vertical ports in the primary discharge chamber to counteract muzzle rise, while the Short Energy Pulse system decreases recoil length, preventing stacking of repeating shot energy and enabling fast, accurate follow-up shots. Even with fully automatic fire, the Dragon delivers significant reduced recoil and muzzle climb, so more shots land on target. Machined from ultra-hard steel, the Dragon is virtually impervious to heat, corrosion and wear. Flats on the side allow you to install it with any standard wrench. Includes crush washer for secure fit and proper indexing.
SPECS: Carbon steel, nitride finish, black. Approx. 2.6" (6.6cm) long, .866" (22mm) O.D. .308 fits .308/7.62mm NATO rifles with 5/8"-24 tpi muzzle threads.
Prevent unwanted and expensive damage to your rifle’s muzzle threads and crown with easy-to-install thread protectors. Knurled exterior gives you a firm grasp to install or remove the protector in seconds. Available in popular thread sizes and diameters to match most commonly available rifle barrels.